Megadap ETZ21 Pro review: A Sony-to-Nikon mirrorless lens adapter with impressive autofocus performance: Digital Photography Review
Photo: Dan Bracaglia
It’s okay to be curious – the Megadap ETZ21 Pro is an affordable and surprisingly compact AF-capable accessory for adapting Sony E-mount glass to Nikon Z-mount bodies, including both full-frame and cropped lenses/cameras.
Priced at $250, the ETZ21 Pro supports electronic communication for full autofocus, autoexposure, image stabilization and aperture control. EXIF data is also transferred from lens to camera body. But how does it perform? Read on.
Key features
Adapts Sony E-mount lenses to Nikon Z-mount camera bodies
Compatible with full-frame and crop lenses/bodies
Electronic contacts for full AF, AE, IS and aperture control
EXIF data transfers between lens and camera
Thin, stainless construction
$250
The Megadap ETZ21 Pro Sony E- to Nikon Z-mount is available now for $250.
Buy now:
Competition
The ETZ21 Pro is seriously thin.
Photo: Dan Bracaglia
There are a number of similarly-priced and spec’d adapters out there promising full AF/AE compatibility, including options from FotodioX and Techart. The former looks like it could have shipped out of the same factory as the Megadap. The latter looks a whole lot like Megadap’s prior generation Sony-to-Nikon accessory and which you can read more about in our review.
The discontinued Megadap ETZ11 is the predecessor to the current ETZ21. It offers similar function, but less speedy performance overall and a less robust build quality. Given the option, go for the newer version.
There are also, of course,
Design
This diminutive piece of tech is delightfully powerful.
Photo: Dan Bracaglia
The Megadap ETZ21 Pro is a remarkably diminutive accessory. It adds only 2mm to the length of a lens, but that’s not an arbitrary amount. This positions your adapted E-mount lenses at the 18mm mount-to-sensor distance they were designed for instead of the 16mm distance a Z-mount camera provides.
Built from stainless steel, it feels reassuringly solid and well-made in hand. However, the fit can be worryingly tight with certain lenses and camera bodies. It continues to take some considerable effort to dismount the Megadap from my Nikon Z50.
The metal tab on the adapter acts as a lens lock. Beyond that, there’s not much to discuss design-wise besides the electronic contacts and mounting marks. Ultimately, it’s a refreshingly straightforward piece of tech.
Performance
Face and eye detection work great.
Nikon Z8 + Sony 24-70mm F/2.8 GM II. Out of camera JPEG. ISO 450 | 1/250 sec | F/2.8 | 70mm
Photo: Dan Bracaglia
I tried out the Megadap ETZ21 Pro using two different setups: a Nikon Z8 with Sony’s latest 24-70mm F/2.8 GM II and a Nikon Z50 with an ancient E 16-50mm f/3.6-5.6 kit lens attached.
AF speeds and precision impressed me in decent lighting conditions and with the latest-gen Nikon camera and Sony lens. Nikon’s subject detection and focus tracking work almost as if a native lens is attached. AF speeds slow down a little in lower light but are still very good. In general, I was able to use Face and Eye detection on the Z8 with great success, despite having a Sony lens attached.
Nikon Z8 + Sony 24-70mm F/2.8 GM II. Out of camera JPEG. ISO 64 | 1/250 sec | F/3.2 | 24mm
Photo: Dan Bracaglia
The Z50 and Sony 16-50mm combo performed modestly in decent light. Keeping in mind this lens is so long in the tooth, it might as well be a stalactite, I was again impressed with the performance. In low light, however, I ran into plenty of hunting and mis-focused shots, which is exactly what I expected. That said, I don’t doubt that more recent, faster-aperture Sony primes, like the Sony E 15mm f/1.4 G, will perform admirably via the Megadap on my Z50.
It’s also worth mentioning that not all third-party Sony E-mount glass is currently supported by this adapter. Some folks report AF issues with especially long telephoto lenses. The takeaway? If you’re considering the Megadap ETZ21 Pro, try to take it for a spin with your current setup before committing to buy or put it through its paces during the return window.
I was able to use Sony’s 16-50mm kit zoom on the Nikon Z50, but not without a little (well, a lot) of vignetting.
Out of camera JPEG. ISO 12,800 | 1/320 sec | F/3.5 | 16mm
Photo: Dan Bracaglia
Making lens corrections
My Z8 photos look ridiculously sharp, despite the unusual pairing of gear but not every lens will fare as well. Because your Nikon camera can’t recognize your adapted E-mount lenses, geometric distortion and vignetting corrections can’t be applied to the camera’s JPEG output. This presents a challenge for any lens that was designed with the expectation these corrections be taken care off automatically.
Processing the Raws gives a little more flexibility, but these files left Adobe Camera Raw somewhat stumped on how to approach lens corrections. For the Z8 combo, ACR automatically defaulted to the Nikon 24-70mm F/2.8 when I selected Auto Lens Correction. For the Z50, ACR didn’t even bother to provide a lens profile when I clicked the auto option. Capture One provided similar results. You can manually select the corrections in ACR but it’s worth checking if your preferred software will let you apply corrections for lens combinations its creators hadn’t anticipated.
Conclusion
The Megadap ETZ21 is a solid product built for a rather specific crowd.
Photo: Dan Bracaglia
The Megadap ETZ21 Sony E-mount to Nikon Z-mount adapter is a reliable method for attaching Sony mirrorless lenses to Nikon Z-mont mirrorless bodies without sacrificing autofocus, autoexposure or lens stabilization capabilities. Performance is impressive but it’s no magician.
You’ll still have better overall AF performance and precision sticking to native-mount lenses, sans adapter. And older Sony lenses tend to struggle when adapted in all but the best lighting conditions. Additionally, it may not always be possible to apply the lens correction that is an essential element of some lens designs.
However, as far as what’s currently available for Sony shooters wishing to dabble in the Nikon realm, there is no better option on the market than the Megadap ETZ21 Sony E-mount to Nikon Z-mount lens adapter.
The Megadap ETZ21 is truly a barely-there lens adapter.
Photo: Dan Bracaglia
What we like
What we don’t
AF speeds are impressively fast
Works with Eye and Face AF
Exif data captured
Firmware can be updated via attached camera body
All-metal design
2mm thick when mounted
Best performing adapter in its class
Tight fight with some camera bodies and lenses
Not compatible with all third-party E-mount lenses
AF may be finicky with long telephoto lenses
Lens corrections may not be available when processing
Buy now:
