Geekworm X1001 PCIe M.2 Key-M NVMe SSD PIP PCIe Peripheral Board for Raspberry Pi 5

Price: $32.98 - $15.99
(as of Jan 07, 2024 23:32:04 UTC – Details)

Product Description

Note: The Raspberry Pi 5, M.2 NVME SSD, power supply is not included in the packing list.

Overview

The X1001 V1.1 shield is an NVME M2 SSD PIP (PCIe Peripheral Board) for the Raspberry Pi 5 that uses the new PCIE interface of the Raspberry Pi 5 to utilise the NVME M2 SSD for fast data transfers and ultra-fast booting.

User Manual: wiki.geekworm.com/X1001

Features

Minimalist design, easy to install.FFC cable is only 30mm length.Compatible with other HAT shield;Supports installation of official Pi 5 active cooler;Dual LED Indicators:PCE: PCie – The LED will be on if the SSD is recognised; ACT – M.2 disk activity (“ACT”).Supports 2230/2242/2260/2280 NVME M2 ssd.Can Power the X1001 shield directly from the FPC PCIe ribbon (providing maximum 5W of continuous power)Integrated with XH2.54 5V power connector, just use it if you are using a ultra large capacity SSD if the current is not enough.

PS:

Maximum current for PCIe wire is 1A, and voltage is 5V.If you find that the SSD is not working properly, it is possible that the power supply of SSD is not enough, then you need to check the current requirement of your SSD to decide whether power the SSD separately.The X1001 hardware has no limit on NVME SSD capacity, which is dependent on the Raspberry Pi OS.

How to Power

Can power the X1001 shield directly from the FFC PCIe ribbon (providing maximum 5W of continuous power)

Packing List

1 x X1001 V1.1 NVMe SSD Shield1 x PCIe FFC cable(30mm length)3 x M2.5x17mm F/F Spacers6 x M2.5x5mm Screws1 x M2x4mm Screws (to fix MVME M2 SSD)

Compatible with
Raspberry Pi 5 Raspberry Pi 5 Raspberry Pi 5

Mounting Position
Top Top Bottom

M.2 NVMe SSD
2230/2242 2230/2242/2260/2280 2230/2242/2260/2280

Matching Case
P579(ASIN:B0CRD7XQCK) P579(ASIN:B0CRD7XQCK) Will release soon

【M2 SSD Supported】Support M.2 KEY-M NVMe SSD 2230/2242/2260/2280 length installation. (Do not reserve the nut column to fix the 2230/2242/2260 SSD.)
【How to Power】Power the X1001 shield directly from the FFC PCIe ribbon. Recommend to use Geekworm PD 27W power adapter (ASIN:B0CP7WPZZY )
【Packing List】1 x X1001 PCIe Peripheral Board, 1x Accessories Pack (Note: not include Raspberry Pi 5, SSD, TF card or power adapter.)
【User Manual】Refer to Geekworm WiKi and search X1001.