5Pcs 4 Pins LED Strip Light Connector 10mm/0.39in Wide L Shape Right Angle Corner Connector Adapter Terminal Extension Suitable for Flexible 3528/5050 SMD RGB LED Strip Lights

Price: $4.99
(as of Jan 15, 2024 21:29:55 UTC – Details)

Specification:
Voltage: DC 0-24V
Max Wattage Support: 72W
Working Temperature: 0~40℃
Storage Temperature: -20~60℃
Fit for SMD 5050 LED RGB Strip Light/LED strip in RGBW color
Installation Instructions:
1.Open the connector using a tool with a thin edge;
2.Slide the L sheet under the connectors’ prongs;
3.Cut the light strip on the copper cutting line; (Note: To avoid electric shock and burn, please turn off the power before cutting and reattaching light strips.)
4.Peel off the back adhesive around the cutting line; (Note: For waterproof light strips, you need to peel off the silicone coating around the soldering line first.)
5.Slide the light strips under the connector’s prongs, with the + polarity on both strips aligned; (Note: The + on light strip doesn’t have to match the + on the connectors. The connection works as long as the + on both strips are aligned.)
6.Close the clip and set it up
Package Included:
5 x 4 pin L shape connector
Note :
If the connection is loose, the LEDs will either flicker or do not light up, please follow these 2 tips:
1. The L-shaped PCB board is removable and detachable, please move it to the right place to ensure good electrical conductivity.
2. After you have inserted the LED strip into the connector, before you close the cap of the connector, please slightly pull and push the LED strip to adjust the connection point, until you see the LEDs light up.
If the LEDs do not light up, please use your finger to press a little hard on the 2 metal contacts in the connector, until you see the LEDs light up.

Package Dimensions ‏ : ‎ 3.39 x 1.89 x 0.28 inches; 0.32 Ounces
Item model number ‏ : ‎ mode L
Date First Available ‏ : ‎ August 10, 2023
Manufacturer ‏ : ‎ Shutao
ASIN ‏ : ‎ B0CF8Z59ZQ

LED light strip connectors comes with detachable L sheets and straight couplers, perfect for both 90-degree corners and extension along a straight line.L-shaped connectors support to 72 watt max wattage.
4pin led connectors indoor and outdoor use, compatible with both waterproof and non-waterproof light strips (Please peel off silicon on the surface around soldering line area when install waterproof strips ).
Just slide the light strip under the connector’s pins and snap the clip. (Tip: Please do not pry up the metal pins. Doing so may cause poor contact.). No matter in what orders are the RGB+ marked on the connectors, the connection work as long as the ”+” and “-” of the light strips on both sides are aligned.
Note: Make sure you put the led strip under the pins and not on top. Please peel off silicon on the surface around soldering area when installing waterproof LED strips. Also be sure to cut along the suggested line evenly so there is room for a proper connection on each side