Vekooto Magnetic Solar Wireless Backup Camera, Upgrade Auto On/Off Camera HD 1080P 7 Inch Monitor System Trailer Hitch Rear View Camera Rechargeable RV Backup Camera for Truck RV Car

Price: $159.99
(as of Jan 26, 2024 03:01:40 UTC – Details)

Product Description

VEKOOTO Upgraded 30-DAYS* STANDBY Magnetic Solar Wireless Backup Camera System

Upgrade and Upgrade: The backup camera uses proprietary R&D tech for automatic sleep/activity switching, achieving a 30-Days* standby.

*Assuming the monitor’s power is off after using the camera for 30 minutes daily, enabling continuous usage and standby for 30 days. (Camera fully charged)

*Second Camera Requires Separate Purchase

Can turn on/off guidelines and adjust their length, width, and height.

In complete darkness, Infrared night vision is your great companion.

1 Stronger Signal 2 2 Split Screen 3 DIY Guidelines 4 IR Night Vision 5 Temperature

Image Flip

Switch to mirror mode when using the camera as a backup camera; adjust the image to normal for front view.

Wide Angle

The 150-degree wide viewing angle will not make the picture excessively curved, making it easier to judge distances.

IP69K Waterproof

Waterproof magnetic backup camera that works perfectly in all weather.

Loop Recording and Playback

The monitor includes a 32GB memory card.

Maximum support is a 128GB SD card.

No Wiring No Drilling! Easy to Install! How to install magnetic backup camera?

The camera’s magnetic base allows it to stick to vehicles. You can attach it to the back of your trailer, observe a tow hitch on your truck, place it inside a horse trailer to monitor horses, or use it to watch over the entrance of your RV. (Non-metallic vehicles can use the included metal plate.)

How to install the monitor?

Plug and Play: Connect the power cord to the monitor and power it through the 12V power interface. The power button on the power connector allows for quick on/off control of the monitor.

Hardwiring: Connect the power cord to the positive (ACC) and negative terminals inside the fuse box.

Two brackets

Specifications of the Wireless Magnetic Solar Backup Camera 7 inch Monitor Kit

Monitor Size 7-inch Camera Size 4.33in*3.34in*2.87in (L*W*H) Camera Resolution 1080P Camera Battery Capacity 9600mAh Rechargeable lithium battery NIght Vision IR, 30ft Camera Waterproof Rating IP69K Signal Transmission Range 328ft Applicable Vehicle Length 50ft Operating Temperature -4°F ~ 158°F / -20°C ~ 70°C Camera Charging USB C Cable Charging(5V-2A Max), Solar Charging 50 mAh/H Monitor Power Supply 12-24V DC, 12V power supply socket(cigarette lighter) or fuse box power supply (Power cord included) Camera sleep/active switching Follow monitor automatic sleep/activity. (The monitor turns off and the camera automatically sleeps. The monitor starts and the camera automatically connects.) Full Charge: Camera’s Runtime Continuous working time: 15-20 hours Full charge: Cam Standby Time The camera can remain on standby for 30 days or longer, assuming a 30-minutes daily use. (Standby power is 99.97% lower than operating power)

Not Just a Backup Camera, But Also Your Good Assistant

Plug-and-play functionality is at the core of our design for this magnetic backup camera system, eliminating the need for intricate wiring. Its portable design lets you place the camera anywhere you want with ease.

Is the magnetic camera really wireless? How is the camera installed? Do I need to drill holes and install with screws?

This magnetic camera has a magnetic base and a built-in rechargeable battery, so no additional power is needed to power it, so no drilling or wiring is required.

How long does the camera last on a full charge?

The back up camera works for over 15 hours continuously. Power off the monitor when not using it to put the camera in sleep mode, reducing power consumption by 99.97%. Tested: 30 minutes daily use enables the camera to standby for 30+ days.

How to use magnetic camera to magnetically attract aluminum body and fiberglass body?

There is a special black metal plate in the package. There are 4 screw holes on the metal plate. You can use the screws to fix the metal plate to the aluminum body and then use the magnetic camera.

How to make the backup camera enter sleep mode? How long does it take to charge the backup camera?

Just power off the monitor and the camera will automatically enter sleep mode. Power on the monitor and the camera will automatically connect. Backup camera charging with included charger and cable takes 6 hrs. Charge 6-7 hrs before first use.

What’s the camera upgrade?

VEKOOTO’s latest backup camera syncs with the monitor for automatic sleep/active modes via its in-house chipset, ensuring ultra-low power standby. Enhanced with high-performance, heat-resistant materials, it’s more efficient and durable.

Upgraded Automatic Camera On/Off: Our wireless backup camera synchronizes with the monitor, effortlessly turning on and off without manual intervention. When the monitor power off, the back up camera enters a sleep mode, reducing power consumption by a staggering 99.97%.
1-Minute Installation: The magnetic base of our wireless backup camera ensures a hassle-free setup, taking merely a minute! Our trailer backup camera ensures stable signals up to 50ft. Perfect for various vehicles such as trucks/pickups/cars/campers/RVs/horse trailers/5th.
2 Channels & DIY Guidelines: Vekooto’s RV backup camera wireless can add a second rear camera to reduce the blind spot in driving and make travel safer. Also, you can adjust the guidelines according to your preferences.
DVR Loop Recording: RV security camera system built-in record function and loop recording, continuous record when memory card is full and auto erase old files. (Pre-installed 32GB SD card, can be expanded to 128GB)
Quality Assurance & Support: We stand by our product’s quality. With a lifetime of technical-support, a 2-year replacement service, and a 30-day money-back guarantee, Vekooto ensures your satisfaction.